Once I have found out the correct height that the chassis should be at, I can put it on blocks a couple of inches lower, then position the rear subframe accordingly and start cutting frame. It looks like the rear seats will be lost at there will be reinforcement to the stepup as I'll be losing the bottom bit.
Not a very clear pic but .....
This also helps to show what I'll be cutting out!
You can see where the sub was mounted to the car via the three large mountings/holes but I'll be cutting chassis and setting the subframe into it and welding into place.
Once I've sorted the mods to the front suspension and anything else that needs removing I'll get chassis blasted and painted.
No comments:
Post a Comment